gunnsrevenge t1_jdnsye2 wrote
Reply to comment by twiggs462 in How you you fix a small concrete statue that is cracked horizontally? by twiggs462
They make static mixers for jb weld- syringe like nozzles that mix as you apply. I use similar at work for industrial adhesives. Works great. https://i.imgur.com/wKBIqoX.jpg
twiggs462 OP t1_jdnti63 wrote
Perfect! Thanks!
gunnsrevenge t1_jdnuong wrote
Should work great. If you have a grinder and enough access grind the opening of the crack a little bit to clean it up and allow better penetration. I also masked off the area around the break with tape to keep the epoxy off of the surrounding area. Be patient Let it cure a good long time depending on your weather. Warm temps speed up reaction time cold slows it down a lot. Good luck!
twiggs462 OP t1_jdnxsph wrote
This confirms my suspicions and eases my fears! Thanks again.
Viewing a single comment thread. View all comments