Viewing a single comment thread. View all comments

cptnamr7 t1_iubvhqb wrote

Hard to say without seeing both sides exactly how this one works, but that hole looks suspicious. I'd try pushing a small nail in there to see if it releases something. Or the other side may have a small tab to push in to release the handle. Or it may ha e screws to simply tighten for all I know at this point. I'm assuming not or you wouldn't be asking. But I'd starting poking in any holes/tabs you find while pulling on a knob to see what happens. (There's a joke in there somewhere...)

4

SuspiciousChicken t1_iubzv4x wrote

Yes. Need more pictures from all directions of this side of the door handle, and the other.

2

beccasr OP t1_iuc3k6m wrote

Hi, I just added a couple more photos.

2

SuspiciousChicken t1_iuc5qh7 wrote

there it is - remove the handle with a hex wrench (allen key) at that set screw here. After that, you can probably just pop off the rose using a flat blade screwdriver under the edge, and you'll have access to the main fasteners that are holding that lock in place.

6

beccasr OP t1_iuc3k0z wrote

Hi,

Thanks for your help... and humor :)

I've added a couple more photos. The hole on the front is to unlock the door.

2