Viewing a single comment thread. View all comments

KisukesBankai t1_itmk42p wrote

Reply to comment by AKdgaf in General Feedback/Getting Started Questions and Answers [Weekly Thread] by AutoModerator

That's super helpful, thanks. Yeah if it was just one I would consider going in the wall to get around outside the box but it's a bunch of outlets on various wall sections. So the fire putty is safe inside the box? Won't cause overheating or doesn't need air circulation?

1

AKdgaf t1_itmy8i4 wrote

Gotcha, if all your outlets are letting in cold air, problem is more likely to be the insulation in the walls at the sill plates, that can be a much bigger and expensive fix. Sealing the outlets will help but is still a bandaid on the larger problem of cold air entering your walls somewhere. Personally I would still seal my outlets. In my own home where I know the outlets are terminated correctly and that my gfcis and breakers work and everything was installed correctly, I would have very little worry about using the putty on the inside of the outlet box. I'd still be sure to take up as little space as possible inside the box. I would focus on sealing where the wires enter the box which should eliminate the majority of the draft.

2

KisukesBankai t1_itn8w4f wrote

Thank you. That may have to be the case as the light switches don't have an easy bandaid like the baby proof plugs. I'll look into the putty.

1