Viewing a single comment thread. View all comments

JerewB t1_isjg5y8 wrote

Not sure how loose the hinges are, but you might be able to wrap a wire hanger around the hinge pin to lift the door vertically.

A diagonal cable stay with a turnbuckle from the top hinge side to the bottom latch side might be able to tweak the door slightly if it's no longer perfectly square.

Consider trimming back the contact area to reduce rubbing.

1

Dontknoworcare2 OP t1_isjor7n wrote

There's no slack in the hinges at all. I just posted some pictures of what it looks like.

1

JerewB t1_isjsutc wrote

Ok I misunderstood the door type. Seems like the frame is no longer square, too high on the latch side. Not sure how the frame is installed, but the hinge side needs to be shimmed vertically.

2