Submitted by thrwaygrdn t3_z17pzz in DIY
Horsiebox t1_ix9ph9a wrote
Make sure the insulation is not the full depth of the truss, so when you put the floor down, air can flow over the insulation. You attic needs to be ventilated.
thrwaygrdn OP t1_ix9r1z1 wrote
Unfortunately the insulation is the full depth of the truss. I guess I could put battens over the truss to basically make a raised platform for the attic floor so that air can then get underneath and to the kingspan, but is it still fine with the plasterboard tight against it underneath? Thanks a lot for your response by the way, much appreciated
Viewing a single comment thread. View all comments