Viewing a single comment thread. View all comments

ThatGuyFromDaBoot t1_ixzmwhx wrote

Can't quite tell the source of the sag in the pics. In my experience it is usually from the hinge pulling loose from the frame or weight pulling the frame away from the opening itself. I usually replace one screw on that side of the hinge with a 2"-3" screw that reaches all the way to the wall framing.

If the hinge is bending though it needs to be replaced.

2

shervmeister t1_ixzo4d7 wrote

Yes, grab a drill (or better yet, an impact) and suck those screws in tight. I replaced all my door's upper hinge's middle screw with a 3" because they're just heavier doors and needed the support

1