Viewing a single comment thread. View all comments

ergodicthoughts_ t1_j1qdzwo wrote

Guarantee it's because you let thinset build up around the spacer which prevents it from breaking low enough. Cut this one out manually. Use a Dremel if a knife won't work. In the futur, clean off the spacers with your spatula before they dry and this won't happen .

53

TheShoot141 t1_j1qfvmb wrote

Utility knife will get it done just have to be careful.

17

Zed-Leppelin420 t1_j1qxg8s wrote

Yeah you have to clean the edge of the tile with a small putty knife then put the clip in. And yeah it’s a huge pain in the ass and you will def chip a tile or two trying to get it clean. It’s just so much easier at the start takes 15 secs to wipe it rather that 15 mins carefully scraping

9