The right opening has a round cover in the bottom. Can you pull it up with the plastic stalk? Maybe with pliers?

Maybe they covered the hole up so sewer gases don’t go into the house.

Are you sure the opening on the right is a blank? It looks like there is a cover that should pop off where the drain hose will go

Just pop out the plug covering the drain

Should be at the bottom right inset below the round knockout.

Yes. What everyone else said. Pull out the cover and that's the drain. Make sure you secure the drain hose to something. They tend to kick themselves out if the are not secured to something.

Bottom right looks like the dryer vent. The drain is the cutout next to the hot/cold lines. Looks like a plug there

Right side is a knockout.

• Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

• Please do not use /r/DIY as your first stop for questions - we are not Google.

• Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

• Have you already done some basic research and are still stuck?

• Please include what research you have done in your question so that others do not repeat your steps.

• Consider posting your question in the sticky thread at the top of the subreddit.

• Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.