Viewing a single comment thread. View all comments

baseballfan1192 OP t1_j27r20t wrote

Reply to comment by display__name__ in 6x6 beam on 4x4 post by baseballfan1192

Posts are ~7ft tall. The roof is just 2x4s about 2ins apart laid across 2x6 rafters spaced about 3ft apart . I’m in Southern California so no snow

1

display__name__ t1_j27ro9t wrote

I'm an LA-based structural engineer. Since you're in SoCal, the patio cover also needs to meet the building code seismic safety requirements. You don't want it coming down during an earthquake. This is something that the building department will need review, approve, and inspect. You should hire an engineer for this type of work

4

baseballfan1192 OP t1_j27tqct wrote

What should I expect to pay for something like that?

1

display__name__ t1_j27tyr8 wrote

Most local engineers will start their fees around $750 to $1,000. You might also need an architectural designer (drafter) to make field measurements prepare a site plan for permitting. Some designer will have their own engineers that they work with

1