Submitted by RobotKevinSpacey t3_11czsxt in DIY
Bobmanbob1 t1_ja5yse5 wrote
Pressure treated Pine. They will be fine. If you have them totally bare, you can slap a sealant on them if you want.
loptopandbingo t1_ja7bneg wrote
Not necessarily. Depending on when the deck was installed and where the wood came from and what it was treated with, there's a possibility the pressure treatment was ineffective. There's a class-action lawsuit going on about it. OP is probably fine, but at work I'm currently dealing with the bad wood that's totally rotten on the inside from the years of terrible batches of PTL.
Wildcatb t1_ja7qbjn wrote
I was building my house when the new and 'improved' treatment standards were imposed. Half the treated lumber I used was old, good, long lasting treated pine. Half ended up being the new crap. I've replaced most of the new stuff at least once since then. To say I'm displeased would be an understatement.
ScottieRobots t1_ja7o903 wrote
Ooof, that sounds like a fuckin nightmare.
loptopandbingo t1_ja7uha7 wrote
Yeah, we're not thrilled lol
ScottieRobots t1_ja81zta wrote
Sounds like a real... pain in the deck.
I'm sorry, I'll go now.
bmore_conslutant t1_jaan77b wrote
don't let the door hitcha
Sanfords_Son t1_ja8ht9m wrote
$145,000?! That must be one hell of a deck!
Hey_look_new t1_ja6gvcn wrote
this is exactly my thought as well
Viewing a single comment thread. View all comments