Viewing a single comment thread. View all comments

ThePresidentsNipples t1_ja8k00a wrote

Reply to comment by knewtoff in Shower valve versus handle replacement? by knewtoff

I've never got them together myself, so I would assume not. Get a flashlight when you pull the cartridge and look for a seat. if there is one, look for wear and chipping. If its beat take it out by unscrewing it with a big flat head or two flatheads, or go get the tool specific for seat pulling(its cheap). Take that seat into your hardware store to compare it so you get the correct one..... looking closer at your pics, those definitely look old enough to have seats.

12

BYoungNY t1_ja9cxqz wrote

Fyi there's a seat removal tool that you need. Its usually square shaped and sold either at home Depot or Amazon for cheaper. You'll use it once every 10 years or so, so it's up to you weather it's worth the price or paying someone else. If you have an old diy'ee on your street I guarantee he'll not only let you borrow it, but be glad that it's getting some use.

10

fangelo2 t1_ja9qeib wrote

And you will never find it again when you need it. Possibly the day after you buy another one

13

WhyWouldYouBother t1_jaa6jms wrote

When you're putting away the new tool. Right where it logically should go.

9