Mr_Butterman t1_iwq6uto wrote on November 17, 2022 at 3:08 PM Reply to I am taking apart a small engine, and wondered how I should label the bags I am placing screws in. by Wooble_Gopp Imo the best thing to do is to put the bolts back in after you unbolt something. I. E. After you unbolt the carburetor and remove it from the head, thread the bolts back into the bolt holes on the head. This way, you can never lose them and you always know where they go. The other thing I do is lay the hardware and parts on a play surface in the order they came out in. Permalink 3
Mr_Butterman t1_iwq6uto wrote
Reply to I am taking apart a small engine, and wondered how I should label the bags I am placing screws in. by Wooble_Gopp
Imo the best thing to do is to put the bolts back in after you unbolt something.
I. E. After you unbolt the carburetor and remove it from the head, thread the bolts back into the bolt holes on the head.
This way, you can never lose them and you always know where they go.
The other thing I do is lay the hardware and parts on a play surface in the order they came out in.