Foreign aid almost ass a rule goes to countries that are very corrupt, and national aid organizations have long since worked out ways to minimize the opportunities for and risks of corruption, ensure accountability and so on.

This is just a belt-and-suspenders move to sway domestic opinion in donor countries for the ignorant masses who never spent a second thinking about how foreign aid works and are therefore easily swayed by people saying "it's a corrupt country, you can't give them money!", as if aid organizations just hand out money blindly, when the reality is they've got decades of experience dealing with those issues. Nobody wants to see their foreign aid money wasted.

Just get one of those killer pipe-welding robots from Diamonds Are Forever.

Long explanation, since this article sucks:

#BCD In the olden days of computing (1960s and 1970s) it was common to represent numbers as "Binary-Coded Decimal". Meaning that, rather than store numbers as a purely binary number, they stored the number as decimal digits with each digit stored as a 4-bit binary number.

E.g. decimal 10 in binary is 1010, but in BCD it's 0001 0000 - the first 4 bits for the digit in the 10s place and the second four bits for the number in the 1s place. Clearly this takes up a lot more space in memory, but it did make conversion of numbers from decimal format to/from binary a lot faster and simpler. So some early machines worked with BCD natively.

The 8080 (and other early microprocessors) had instructions to do BCD arithmetic, in addition to ordinary binary. Probably to make it easier to port code from older systems, as most code written for those machines never used it.

#Flags It's not the instructions themselves that are the problem here though, but a couple of processor flags. These are bits which are updated after certain instructions, indicating whether something-or-another happened during the operation. The exact flags differ between processors just as the instruction set does, but a couple of typical/common ones are the overflow flag, which gets set to 1 if the result of an arithmetic operation overflowed, i.e. was too big to fit in the register where it was stored, and the zero flag which gets set to 1 if the result of an operation was zero.

The state of the flags are used to control conditional flow of a program. More concretely, on the x86 the instructions JO (Jump if Overflow) and JZ (Jump if Zero) will jump to a different place in the program code if the overflow and zero flags are set, respectively.

Now to tie this all together: The 8080 has a flag named the AF (Adjust Flag). It is set after doing an arithmetic operation, signifying that a carrying or borrowing from or to the lower 4 bits of a byte happened. This is intended for BCD arithmetic - so you know whether the lower digit of the number has changed or not. Which might require you to update a display or some such. (yes kids, computers were so slow back then you wouldn't want to update even single digit on a display if you didn't have to)

A second flag that comes in here is PF (Parity Flag), which is set to 1 or 0 depending by counting the number of binary 1s in the result of an operation and setting it depending on whether that count is odd or even. This was needed in the "olden days" for things like serial communication, where data integrity was checked by checking the parity, which was always supposed to be one or the other.

This, too, became mostly obsolete pretty quickly, as most microcomputers would end up having dedicated chips to do serial communications (UARTs) so the processor could continue to run the program and not have to deal with mundane tasks like parity-checking.

#Where Apple comes into it

Newer processors (designed in the last 35 years or so) don't have BCD instructions or these flags, since their purpose is obsolete. But even if they're not used much on x86, they're still there, and need to be updated after each operation regardless, in case the program makes use of them.

So given that they're trying to translate x86 code directly into ARM code here, the fact that ARM does not have those flags is a big issue, since if you need to add even a single extra instruction or two for each arithmetic instruction in order to update the flags, that means you're slowing the code down by 2-3x times. (and that's why emulation is typically slow, even if you have a far more powerful processor than the one you're trying to emulate, the lack of a direct functional equivalence from one instruction to another often means you still have to use many instructions to emulate a single on on the original hardware)

But if you're designing your own chip, it is relatively easy to add support for those extra flags in hardware. (it doesn't slow it down significantly, just means a few hundred more transistors) So they decided to make it a lot easier and above all faster to translate stuff from x86 to ARM by making their own ARM chips secretly have these flags. Flags are stored in a "status register", named NZCV on ARM because it has the Negative, Zero, Carry, oVerflow flags. The register has 64 bits, as it's a 64-bit processor, with those stored in the upper 4 bits of the lower half (so bits 31, 30, 29, 28), so most of it is unused. What Apple did, was to secretly add added the PF and AF flags as bits 27 and 26 of the register, and used them so they could translate x86 code into ARM - using those flags when necessary, and still have it run quickly, much more quickly than if it had to calculate those flags in software after every arithmetic operation.