Viewing a single comment thread. View all comments

tired_and_fed_up t1_jd1d1lj wrote

Wago, never deal with a nut again.

47

FlatterFlat t1_jd28rx8 wrote

Wire nuts are virtually unknown in Europe, we mainly used the screw terminals historically but last few decades Wagos are taking over, especially in the DIY segment in Northern Europe.

Wago 221s for life.

14

Wellcraft19 t1_jd5f60p wrote

Wire nuts are very common - on stranded wires - in Northern Europe (Sweden). Every house I’ve seen has them in the junction boxes. That said, screw terminals (‘sugar cubes’) have a place as well. But they are not better than wire nuts properly applied.

1

ledow t1_jd5gdok wrote

UK - never seen one.

Never saw one in Italy, either.

I can't even imagine why you'd want to use them, to be honest. They're fiddly as hell.

And as others have echoed: Wago nowadays. Every electrician I know has gone for just having a box of Wagos and the last two I asked (who were working on large installs for workplaces) didn't even carry screw terminal blocks with them any more.

2

Wellcraft19 t1_jd5gyux wrote

Maybe because properly applied, few connections are as electrically solid as when using wire nuts. But they sure are used more here in the US - where electrical standards are about a century behind Northern Europe.

0

ledow t1_jd5isi4 wrote

"Wire nuts are not used in the UK because the old ceramic ones were banned many years ago for good reason"

I don't think they're any more solid, and there's a lot of talk that they weaken the connections over time / repeated use.

I've lived in houses (and worked in workplaces) with 40's and 50's wiring (and a couple of workplaces with literal 100-year-old wiring still in place, but unused) and things never came loose, just the opposite.

2

party_benson t1_jd28yhn wrote

I've used these before and really like them. I've had people express their disdain over me using them though but no real idea why.

5

algy888 t1_jd29o05 wrote

Wagos are awesome for things like lighting ballasts. Buy I still prefer wirenuts for anything that has a higher loads or might get hot. If it could get really hot then I use the black Bakelite ones for higher temperatures.

1

MicrosoftSucks t1_jd1v6wj wrote

These are a godsend. No more bleeding hands cutting myself on wires.

3

Axentor t1_jd3fmha wrote

I use these to test my 1lb antweight bit builds. So damn handy.

1