Viewing a single comment thread. View all comments

35mmsteve OP t1_iuihnrn wrote

Reply to comment by festerwl in wheels for outdoor cargo lift by 35mmsteve

I am having a hard time finding urethane or nylong 2 inch wheels with bearings - looked through grainger and mcmaster

1

Tek_Freek t1_iuij17x wrote

Smaller wheel with a shim under it to reach?

1

35mmsteve OP t1_iuisd8l wrote

All the urethan/nylon ball bearing wheels I can find are bigger than 2 inch.

1

festerwl t1_iuikn0v wrote

My fault I missed the 2" size. You're going to be limited in that size to likely roller or delrin bearings. Neither is terrible just won't last as long.

1st choice

https://www.mscdirect.com/product/details/59162040

2nd choice

https://www.mcmaster.com/8369T15/

1

35mmsteve OP t1_iuis8ui wrote

Yeah the first one looks great, until you see the price. 16 x $30 - Dang. The second choice looks like what is there, and they have lasted about 15 years.....so I guess I will go with them. Thanks

1

festerwl t1_iuisxo5 wrote

Yea casters themselves are just crazy expensive. I ordered some last year for work that were like $400/piece. Definitely a cost/benefit part.

1

35mmsteve OP t1_iujpzg3 wrote

I actually found rollerblade wheels small enough. The "aggressive" style rollerblade wheels are 55mm. There is about an inch play each direction on the lift, so it should work. About the same price as the rubber ones from mcmaster when you factor in the bearings and spacers that you have to buy seperate with the rollerblade wheels.

2