Check out these guys. You can build your own wall plates with the "keystone" system. https://www.monoprice.com/search/index?keyword=keystone%20wall%20plate

[deleted]

Don't look for one that has exactly what you need. Get a plate that has blank cutouts, and then buy the inserts that you want.

https://www.homedepot.com/p/Commercial-Electric-White-6-Gang-1-Decorator-Rocker-1-Duplex-Wall-Plate-1-Pack-5006-WH/206427770

https://www.homedepot.com/p/Commercial-Electric-Twist-On-F-Connector-White-5010-WH/206427834

These wall plates deteriorate the signal in the cables. You can easily run cables through the wall with a simple brush plate. Here is an example Home Depot - Single Gang Brush Plate

Keystones are what you want. However you won't find a displayport one because they're too big to fit.

Why not a brush plate? https://www.homedepot.com/p/Commercial-Electric-1-Gang-Brush-Plate-White-5038-WH/207161871

If I can't find a solution, that will be a good alternative

HDMI Repeater - one of these is a great choice for monitors, looks like some other good recommendations have been linked by you and others

that would probably work, what is the plastic connector type called when I search for it?

To my knowledge, those wallplates and the plug-ins are usually called "keystone" connectors.

https://www.homedepot.com/p/NTW-USB-2-0-Type-A-A-Snap-In-Keystone-Coupler-Jack-White-NKY-FF-U2AA-WHT/206657290

hmm, looks like they make them for all types except displayport :(

yeah, that is a possibility if I can't get a solution

Your submission has been removed for one or more of the following reason(s):

• You are asking about a project that someone else did, or you're considering having someone else do.
• You are not asking a question relating to something DIY.
• You are not asking a question at all.
• You are submitting a "DIY Tips" or "Tricks" post.
• You are trying to submit a survey / fundraiser.
• You are asking what an item is called - try /r/whatisthisthing.
• /r/DIY allows only two types of posts - finished projects & help requests.
• If your submission is neither of these - it will be removed.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.

I've never had need to use one, but I believe that standard Display Ports are too big for standard Keystones, so people use a Display Port to Mini-Display Port connector. I think this is the correct type:

https://tripplite.eaton.com/mini-displayport-to-displayport-all-in-one-keystone-panel-mount-adapter-cable-female-female-angled-connector-1-ft~p169001kpabk

I think I might be better off just passing the cables through with a brush plate ... all these modules will be super expensive and I don't know if the displayport signal would get messed up by converting to mini

I appreciate the help though!