Viewing a single comment thread. View all comments

alphaomega45 t1_iyd8two wrote

Reply to comment by wbradford00 in Looking for auto mechanics who will do electrical work by wbradford00

If you already change the o2 sensor in question I would check the related fuse at that point. If the fuse checks good I would test the voltage coming out of the plug for the o2 sensor with a multimeter. Could be possible there is a bad ground in the line.

1

wbradford00 OP t1_iydbvmo wrote

Fuse is good, albeit it is a 20a when it calls for a 10. I checked for continuity at the sensor harness, it checked out but I have yet to try voltage as I thought the o2 needed to be plugged in for the pcm to send the voltage through the wires.

1