RearEchelon
RearEchelon t1_je7sclx wrote
Reply to comment by Verto-San in [OC] Loot by colmscomics
They ate someone carrying a gun and ammo, duh
RearEchelon t1_ja3zb2i wrote
This song will forever hold a cherished place in my heart as it was my introduction to hip-hop
RearEchelon t1_j8730ee wrote
Reply to Executioner (oc) by Juusto-Jones
Now the euphemism "hatchet wound" makes more sense
RearEchelon t1_j6gpo6h wrote
Reply to comment by Life_Of_Nerds in Issue when trying to install drywall anchor- HELP? by togadiz
You can get those exact ones. They're more expensive that way but if you only need a handful it's quicker and easier.
RearEchelon t1_j6fvt9l wrote
Do yourself a favor and go pick up some of these. I don't use anything else for wall hanging anything that's going to have to support a load.
RearEchelon t1_j2er88j wrote
Reply to comment by SnooSongs3993 in Building a desk, installing the legs... how close to the edge of the butcher block is safe to attach screws? by SnooSongs3993
Just pinch a piece of tape to itself around the bit at the depth you want and stop drilling when the tape hits the surface.
RearEchelon t1_j2co2rw wrote
Reply to comment by SnooSongs3993 in Building a desk, installing the legs... how close to the edge of the butcher block is safe to attach screws? by SnooSongs3993
How thick are the plates at the top of the legs? If they're at least 1/8" I would use 1" screws. I definitely wouldn't use any shorter than 3/4". Keep your holes 1" from the edge at minimum, and make sure you predrill. You can use a flag of painter's tape on the drill bit as a depth stop.
RearEchelon t1_j2cnu4o wrote
Reply to comment by grittyoaktitmouse in Building a desk, installing the legs... how close to the edge of the butcher block is safe to attach screws? by SnooSongs3993
Home Despot butcher block tops are edge grain.
RearEchelon t1_j2bgw6c wrote
Reply to comment by FellowConspirator in [Homemade] Arancini by Bloodfart2112
>left over risotto?
That's always the problem in my house: I never have leftovers when I make risotto!
RearEchelon t1_izmp17x wrote
Reply to Made by me, more in the comments by sidharthojha
Cenobite vibes
RearEchelon t1_ixxjvd5 wrote
Reply to "s_nx_v|l", made by xrev_v (me) by xrev_v
Makes me think of a Myrddraal.
RearEchelon t1_ixw3waj wrote
Reply to comment by riascmia in LPT: If your microwave dies, donate the glass tray before throwing out the appliance. Someone has broken theirs and will love finding it at a thrift store. by pioneertele
All mine have always had the little thing on the bottom where the motor spins them. Sort of precludes them being stable on a flat surface.
RearEchelon t1_ivhh5iz wrote
Reply to comment by AutoModerator in Researchers have found that having more babies reduces the risk of endometrial cancer. by IMBatUQ
Still not worth it
RearEchelon t1_ish7r40 wrote
Sand and paint, finish sand and clear coat.
RearEchelon t1_irxyxle wrote
Reply to comment by mowbuss in An armlet I made with just wire and a gemstone. by Buffyferry
You're not the only one. It's like reading the Bible.
RearEchelon t1_jegwq95 wrote
Reply to comment by Waitsfornoone in My doctor told me that I had a healthy prostate. by 1963Jan
Mi scusi