jakkarth
jakkarth t1_izaaopj wrote
Your submission has been removed for one or more of the following reason(s):
- Your post was regarding cooking, cleaning, general maintenance items.
- Your post was regarding sewing, general automotive repairs, cosmetics.
- Your post was regarding software design, CNC, 3D or laser printing.
- Your post was otherwise not considered a good topic fit for this subreddit.
- Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iz9m216 wrote
Reply to How can I unclog a shower drain that has a push down/pull up plug that can't be removed? by FORluvOFdaGAME
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iz83wqr wrote
Reply to Sealant on TV or a way to waterproof? by votegoat814
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iyhi3ee wrote
Reply to Stapled through Christmas lights by 520porvida
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iydfklp wrote
Your submission has been removed for one or more of the following reason(s):
-
It is nearly impossible identify a load bearing wall visually without the assistance of an engineer's report or the original house plans.
-
This is a DIY sub. Users here are not structural engineers and their advise should not be relied upon for such matters.
-
An engineer's report considerably cheaper and faster than having to repair the damage done to the structure of your house.
If you believe that your post was removed in error, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iycv3ys wrote
Reply to How to fix hole in plaster? by elysiansaurus
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iy4qz6g wrote
Reply to can you run an ethernet cable through an empty conduit in your house on your own? by VanillianArt
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iy47yc5 wrote
Reply to [Help] My exhaust setup by Onlyhereforthelaughs
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iy45j2x wrote
Reply to Drill bit stuck in B&D drill by [deleted]
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iy3tgcm wrote
Reply to Plumbing back ups in two spots. by 403carpenter
Your submission has been removed for one or more of the following reason(s):
- Your post was regarding cooking, cleaning, general maintenance items.
- Your post was regarding sewing, general automotive repairs, cosmetics.
- Your post was regarding software design, CNC, 3D or laser printing.
- Your post was otherwise not considered a good topic fit for this subreddit.
- Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iy3s5ud wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iy3s3nw wrote
Reply to Help. Ring doorbell and existing chime by xrr88x
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_ixuiqi0 wrote
Your submission has been removed for one or more of the following reason(s):
- Your post was regarding cooking, cleaning, general maintenance items.
- Your post was regarding sewing, general automotive repairs, cosmetics.
- Your post was regarding software design, CNC, 3D or laser printing.
- Your post was otherwise not considered a good topic fit for this subreddit.
- Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_ixdevu3 wrote
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_ixazt23 wrote
Reply to Light Fixture Catastrophe by [deleted]
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_ix86bus wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iwqanwz wrote
Reply to I am taking apart a small engine, and wondered how I should label the bags I am placing screws in. by Wooble_Gopp
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iwhyrxs wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iwge864 wrote
Reply to How to unbend a bent wheel bracket by potatotron
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_ivjmsdl wrote
Reply to How to increase chair height? by MushroomKid
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iv108c0 wrote
Reply to Shrink wrap help !! by ectrez
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_iv107f2 wrote
Reply to Temporary downpipe repair. I did it myself! by [deleted]
Your submission has been removed for one or more of the following reason(s):
- You have not provided progress photos or video, or your progress photos or video are not adequate.
- Progress photos/video must show every step of your project (materials, tools, methods used).
- You must show the process of how you completed your project - not just the end result.
- Consider submitting your project to /r/somethingimade if you are unable to provide enough photos.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
- Your descriptions on your photos or video are inadequate.
- Descriptions must detail important aspects of your project (method used, tips, problems encountered, measurements, materials, tools, etc). Every step must be explained, start to finish.
- Imagine you are teaching a classroom of students with zero experience and they will recreate your project based solely off your description of how to complete it. Explain every single step.
- If we are unable to determine how you got from one step to the next based on your descriptions - they will not be accepted.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_ius0sru wrote
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
jakkarth t1_itzddcz wrote
Reply to comment by [deleted] in I DIY’d this bloody red leather purse for Halloween! by Elledawg
Agreed. If you see sexual harassment in either direction, please use the report
button to bring it to the attention of the moderators. We don't tolerate it regardless of who the target is.
jakkarth t1_j2dqo6n wrote
Reply to Do I need to use a self leveler before I put down vinyl flooring? by Dazzling-Win-1817
Your submission has been removed for one or more of the following reason(s):
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
Please do not use /r/DIY as your first stop for questions - we are not Google.
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
Have you already done some basic research and are still stuck?
Please include what research you have done in your question so that others do not repeat your steps.
Consider posting your question in the sticky thread at the top of the subreddit.
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.