Not sure what's left aside from that these days. Almost every major controller is supported by Steam Input these days, so remapping and gyros are available pretty much across the board where there's hardware support for it.

> Right touch pad with gyro is insanely good for aiming.

But turn the gyro sensitivity way down! It should be at one of the bottom 3 settings; the default is way too high.

Flick the right trackpad to get mostly lined up with the target, then tap and hold to cancel the inertial drift and enable the gyro. With the gyro sensitivity low, you'll be able to rapidly twist the controller to make fine corrections to the inaccuracies of the flick, and perfectly line up your shot. Can get ~80-90% the accuracy of mouse aiming with some practice.

But I liked the touchpads :C

> At 450 watts max draw at standard 120V mains power, the supply is only going to be pushing 3.75 Amps through the connector.

The problem was never the C13/C14 connector handling mains power. The power supply feeds 12V DC to the card over the connector we're talking about, for 37.5 amps that that connection handles.

Working link for everyone not using the broken Reddit app:

https://www.youtube.com/watch?v=_z58lEnnX1k&ab_channel=JayzTwoCents