Submitted by marketrent t3_yfa5pz in space
Comments
djdsf t1_iu2nasb wrote
I'm stupid compared to these fine folks that make this tech, but has nobody ever told them to stick like a brush or something that can run electrically and clean the solar panels?
If I have 10% power remaining, i might as well use 8% of it to clean the thing that generates power instead of praying the wind cleans the panels.
Or is there a reason why we can't attach an electric brush but we can attach drills and all this other stuff?
cjgranfl t1_iu2owsq wrote
Great question; I kind of wondered about that one myself. It seems technically feasible.
alle0441 t1_iu2pje5 wrote
It's more just that the probe isn't designed to last a long time. Original designed lifespan was 2 years and it's coming up on 4. Sure they could do things to extend the life, but that would be spending extra time, money, added weight, complexity when the requirements don't ask for it.
djdsf t1_iu2q0ea wrote
While that's true, wouldn't the argument that keeping something alive for longer is also cheaper than building a whole new one and sending it to space again?
I'm understand new tech as well, but come on, there has to be a world somewhere where keeping this thing alive for an extra year for maybe $3M more is cheaper than sending another one that will run 3 years for $70M right?
moeriscus t1_iu2qrbm wrote
Fair point, but I think it's obvious that NASA lowballs the expected lifespans in order to avoid overpromising/underdelivering to the public and to budgetary committees
Count_JohnnyJ t1_iu2qzi0 wrote
"Cheaper" doesn't matter when you have X budget, and if you don't spend it, you'll have a smaller budget the next year because you obviously didn't need that much.
hoodoomonster t1_iu2shrj wrote
He’ll be ok, he’s just gonna take a nap until we can bring him home again…..😭
Zealousideal-Ad634 t1_iu2ua3m wrote
Or just the ability to vibrate the Solar panels.
gribblefrit t1_iu2vll0 wrote
In the documentaries they talk about complexity. Every little gizmo, servo, control board and gadget they include is doing double or triple duty. They all have redundant systems. It all adds up to a very complex machine. They do things like tilt the panels to shake dust off, but adding the complexity to clean the panels is super hard and, in the long run, not effective. In specific cleaning solar panels with a brush could degrade the panels faster than leaving them alone, theee aren’t the reinforced shatterproof panels on your roof. They are so light weight and delicate that even a brush could damage them. This is some of the balancing act they take each time they send a rover up. How long to get a return on investment so to speak and how long before it goes to sleep.
[deleted] t1_iu2wfqe wrote
CaveDeco t1_iu2xhvk wrote
It’s mostly weight that is the issue. Ounces/Grams matter so you have to choose very carefully what to include. Adding a brush means something else may need to be removed. So you have to make strategic decisions on what’s most important. A longer lifespan but less data, or more data but a shorter lifespan.
Even without it, Insight has still been operational twice as long as it was expected to last.
Lasombria t1_iu2xp16 wrote
My father worked for JPL for 40+ years, and no, they really don't. What they do is make the projected lifespan as guaranteed as possible. A happy side effect of that is these great extended-mission lifespan, but the goal is hitting the primary lifespan securely.
moeriscus t1_iu2yxy9 wrote
Ah, thank you for your insight!
AzPatriotOriginal36 t1_iu2zdpu wrote
Does it not move anymore? Couldn't they just ask it to turn its plates sideways or to tilt sideways and hope the sand falls off, even slightly to get more sunlight to power it back up, even if it takes a while to do, it would continue the mission if it worked or when another mars wind blows through
PiBoy314 t1_iu2zs11 wrote
While there are other methods of getting dust off, Martian dust is fine and sharp enough, having not been eroded by water, that it would scratch the solar panels as it was scraped off.
PiBoy314 t1_iu2zxbk wrote
It never moved, it isn’t a rover. It’s solar panels are stationary too.
Squid52 t1_iu30qsx wrote
You have thirty minutes to remove your space cube
TensionAggravating41 t1_iu33nhz wrote
How in the Fuck did they not account for dust accumulating on solar panels in Fucking Mars? Jesus, NASA can’t even have the hindsight to put on a fucking windshield wiper.
[deleted] t1_iu34qy4 wrote
[removed]
Sabrewolf t1_iu3508t wrote
I work internally with some of the Mars teams at JPL, and these are the best explanations I have:
- Budget budget budget, many of these missions have a cost cap which can't be surpassed. Every additional thing adds system complexity, and ultimate ends up costing money to design/build/test. Even if there's an amazing idea floating around, if it's not in the project budget it's a no go. This includes solar panel dust removal, weighed against the expected science return and lifespan of the mission.
- Martian dust is electrostatically charged, so it "sticks" to the panels rather than sits on them. This complicates removal.
- Brushes are abrasive, and so is sand and dust. On top of the weight and mechanical complexity, point #2 means that you'd have to basically scrape dust *into* the super delicate solar panel to remove a marginal amount of debris. All said and done, wipers/brushes are not effective for this reason.
- Blowers and fans, see point #2, especially relative to the amount of force such a device could apply as compared to a wind clearing event like atmospheric wind. Additionally, Martian dust is so fine that attempting to blow it away with fans/blowers sort of causes a floating cloud that gets sucked back into the fans, essentially turning it into a sand blaster.
- There are methods of generating a burst of electric charge to displace the dust, but these are very expensive, very complex, and have not be fully investigated yet.
[deleted] t1_iu36dj5 wrote
RybaYTC t1_iu37vj6 wrote
This has been an issue with every probe and rover that ever landed on Mars lmfao. You think thousand of qualified scientists and engineers are not aware of this problem? Such system wasn't just developed yet.
[deleted] t1_iu3845l wrote
[removed]
Lasombria t1_iu385pf wrote
Glad to help. :) Dad loved to about distinctions like that.
CartmansEvilTwin t1_iu39520 wrote
That's not really how this works.
These things have a specified lifetime of e.g. 2 years. That means, each component is built and designed to last 2 years with a probability of 99,9%. That in turn means, that there's a high likelihood for the device to survive much longer then two years. Adding additional safety margins for a designed lifetime of 4 years will make the whole thing much more expensive and maybe even less capable, simply because it's going to be heavier.
And additionally, NASA engineers often enough hack devices to work much longer. The Kepler telescope for example had one too many reaction wheels fail and was thought to be dead, but some clever engineer find a way to use the remaining ones to still do some science.
RunLoud6534 t1_iu39b33 wrote
Yeah I definitely didn’t like the articles phrasing “slide into oblivion” but if it helps that’s my preferred method of death (lifeless corpse drifting off into space)
nom_of_your_business t1_iu39gsh wrote
Some of the very smartest people are kinda stupid when it comes to stuff like this. Not a slight just an observation. Super focused on bleeding edge solutions but not thinking about minor issues
Delicious-Ad-9519 t1_iu39o1q wrote
They should take it to the car wash
Rainbowdelights t1_iu3cjm5 wrote
A counter argument to this is the billions of dollars spent to land this thing and do all the rest, could completely mitigate this cause of failure through the addition of a few relatively inexpensive parts
smolDreee t1_iu3deh0 wrote
Why dont they make these types of craft have a device that can shake or blow the dust off of the solar panels? Seems weird to build craft that die to the same problem.
If its going to become space trash when it goes, doesnt it make sense to keep it going for as long as humanly possible? Wouldnt designing it to be able to correct something like this be better than putting more and more craft in space?
BirdOfSteel t1_iu3dr9a wrote
Spacecraft engineers would love nothing more than to implement all the features they will/might need if they could afford it. When your budget is determined by the government, ya take what you can get
Star_king12 t1_iu3ftjl wrote
Anything you send to Mars is excruciatingly expensive.
Lt_Duckweed t1_iu3fxh0 wrote
Wouldn't work, the dust statically clings to the panels, you can't really just blow it off.
LabSquatter t1_iu3fyv5 wrote
It has nothing to do with being super focused and forgetting something. It’s just that often engineering problems can look simple from the outside looking it, but are significantly more complicated in reality. “The rover getting dust on it” wasn’t something they just forgot.
Lt_Duckweed t1_iu3g286 wrote
The dust is statically charged, and also very abrasive. Putting a wiping system on the panel would be added complexity and points of failure, and all it would do is scratch up the panel.
[deleted] t1_iu3go91 wrote
[deleted]
AwesomeLowlander t1_iu3gs1s wrote
You should totally design the next Mars rover
grim-one t1_iu3hvuu wrote
OK, OK... We'll spring for a soft brush for the delicate panels :P
claireauriga t1_iu3ibid wrote
One of the challenges is that in a very low pressure, dry atmosphere like on Mars, electrostatic effects on dust are very powerful. This means that a dusty surface is harder to clean. You know if your TV has dust on the screen, and you wipe it, but you can never seem to get all the dust off? It's like that but turned up to eleven.
Obviously when dust buildup gets bad enough, cleaning would still be beneficial, but it's always going to be harder than a quick brush or wipe.
icbint t1_iu3ka44 wrote
Without water cleaning it in a meaningful amount is too hard
deva5610 t1_iu3kr4z wrote
>They should take it to the car wash
Yes!
Next mission to mars drops off a drive through car wash for all the rovers to use. Genius.
AbrahamKMonroe t1_iu3nccb wrote
It’s NASA. If they haven’t added a feature like that it’s because they know it won’t work or isn’t worth it.
Nidungr t1_iu3o10k wrote
The problem isn't the hardness of the brush, but the dust. It is harder than any sufficiently lightweight material we could make solar panels out of.
Apparently brushing off the dust would just replace opaque dust with opaque scratches, if the panel isn't already sandblasted to hell to begin with.
Edit: The dust is electrostatically charged and clings to surfaces, so you can't easily tip/blow it off.
big_duo3674 t1_iu3o1c7 wrote
Don't worry, NASA is sending a mission specifically to pick up the probe and bring it to a nice farm where it can play with other probes every day!
[deleted] t1_iu3o3w8 wrote
[removed]
alex_sz t1_iu3o6j6 wrote
A directed blow of air would do nicely I imagine
[deleted] t1_iu3p27i wrote
[removed]
Faranocks t1_iu3pplu wrote
I believe that for the most part the dust on the rover is statically charged, which means mechanical motions tend not to remove much of the dust.
CoolHandCliff t1_iu3qjol wrote
What's the cost of sending 1lb to Mars? Like 100 million or something absurd?
wartornhero t1_iu3r6jj wrote
Or at least build a dome around it so tourists can visit him.
[deleted] t1_iu3s15e wrote
[removed]
dangly_bits t1_iu3smgi wrote
I would imagine the required air pump would not only use far more energy than the rover has on tap and would likely be one of the first fail points.
Dsiee t1_iu3tk99 wrote
Not much air on mars, sorta why the wind isn't the best at cleaning. Also the dust is actually somewhat stuck as it has a static charge.
Ex_Machina77 t1_iu3tlxx wrote
The dust is stuck to the panels through electronic static and won't just "shake" off... The winds on Mars are more then strong enough to blow the dust off if it wasn't stuck there through the static charge
Dsiee t1_iu3txgw wrote
No, it is an artificat of designing for a high sucess probability. For a simple example, let's say you want a robot for a 1 year mission with 90% probability of it lasting two years. You design the robot so that it has a failure rate of 5% per year. As a result it is highly likely (~80%) that it will last four years or twice the required mission length.
Obviously this is a very simplified example, but hopefully it illustrates the point that you cannot easily determine the exactly lifespan of a piece of equipment.
Ex_Machina77 t1_iu3txs8 wrote
That only applies to rolling budgets like the US Army utilizes. But essentially that's a myth propagated by terrible supply personnel, who failed to do their jobs properly.
Klezmer_Mesmerizer t1_iu3uonm wrote
R. . .really? •wipes tears off face•
Tricky_Invite8680 t1_iu3wvyr wrote
estimated 2 years, actual 4 years service life. I'm thinking maybe they can redesign the panels to have some kind of thin film cartridge that can basically renew the surface at least once. maybe even an antistatic film to boot. the land based ones must have more structure on the panels then an orbiter.
Hennue t1_iu3x6hk wrote
If the panels were as delicate as you say here, they wouldn't survive launch and EDL.
WimpyRanger t1_iu3xhlo wrote
If it’s electrostatically charged, then you could induce a new charge to eject the dust, yah?
WimpyRanger t1_iu3xqde wrote
- There’s absolutely no way that generating a charge to displace the dust would be very complex, or very expensive relatively speaking.
DtotheUG t1_iu3xtbs wrote
Show those engineers a NASCAR Race
wartornhero t1_iu407ys wrote
And weight budget. At the end of the day they can only send what they can launch and land in one go currently. So if you spend 1 kilogram on a system to clean panels that is 1 kilogram where you don't have a science instrument. It is also like 100 kilos in propellant to get that 1 kg to the surface.
So yeah it is usually better to just try other means of keeping them clear that may extend the life but may not.
tea-man t1_iu40jsk wrote
If I'm not mistaken, this is exactly what's beginning to happen with some of the more advanced solar power projects. Though it is very new technology requiring precise control of the electric fields in individual layers of the cells, so it's still a few years away from large scale adoption.
I suspect that any solar powered rovers that began their initial design in the past year or so may adopt this if it's proven successful.
BecomingCass t1_iu40ppr wrote
I'm pretty sure they're folded up until after landing. Nothing to get scratched on
[deleted] t1_iu40ruc wrote
[removed]
plzsendnewtz t1_iu41ndf wrote
Rotate the shield harmonics! Aye, Captain!
[deleted] t1_iu432gc wrote
[removed]
bathroomheater t1_iu43b00 wrote
So if you have the ability to tilt and move why not give it the ability to swing upside down and tap gently against the rover to knock the dust off
notrewoh t1_iu44cby wrote
The answer is the same as it always is on threads about this lander: it takes more money and adds risk, and most importantly it already surpassed its design life by 2x so the solar panels already did their job. If they didn’t want it to lose charging power via dust they would’ve powered it via nuclear (like curiosity and perseverance). NASA knows solar panels will get dusty and less to slow death (Spirit, Opportunity rovers).
DistrictRude t1_iu44rmo wrote
Hey NASA, add a removable plexiglass cover over your solar panels, just pop it off if this happens again.
[deleted] t1_iu468eu wrote
[removed]
enderjaca t1_iu46cj2 wrote
Reverse the polarity in the deflector array by negative 5! I cannae captain, it won't respond!
enderjaca t1_iu46rys wrote
Because it's very light dust that is electrostatically attached to the panels. Tapping wouldn't do much. And as other folks have mentioned, adding more complexity to the rover means a greater chance of failure and adding more weight, which means more cost, and that you have to choose what other scientific instruments you can't include because you have a maximum weight/cost limit.
Throwaway_97534 t1_iu47auh wrote
But when almost every successful lander is limited by their solar panels at the end of the project, at what point do you start prioritizing them?
DeifiedExile t1_iu47ik9 wrote
You can't just knock the dust off. It's electrostatically charged, so it clings to the panels like a magnet. Additionally, those panels are significantly more delicate than what your average earth-based panel.
musicmunky t1_iu492ur wrote
Phone rings
"Is it about my cube?"
minepose98 t1_iu49j7d wrote
I wonder who is more knowledgeable about this, someone who works with this stuff, or a random redditor? Who looks at a post from someone who knows more about the subject than you explaining the difficulties of something and says "bet it can't be that hard"?
BirdOfSteel t1_iu49qny wrote
I'd say you'd need to start spending more time/money on solar panels if the of one really needs it to function. So far, probes seem to be getting by fine with the current panels we put on them so there isn't too much pressure to be focusing on solar panels if they're doing the job well enough.
I think someone else also mentioned this, but adding things like wipers and whatnot would also increase weight. That's weight which could be dedicated to other important parts of the craft. Yes, you'd end up collecting more power and perhaps you'd maintain your solar cells better than before if you cleaned them, but it would take research and development on something that already works well enough.
That said, solar is something that's useful down here on the ground too, so I imagine that takes some pressure off of space agencies develop the tech from the ground up.
masterpierround t1_iu4aprf wrote
Yeah, it’s going to the probe farm on one of Jupiter’s moons. It’ll love it there, it’ll be much happier playing around with other probes
Regular-Cranberry-91 t1_iu4btmn wrote
Can't it's little helicopter friend buzz down close to the panels and blow off some dust?
Christ_on_a_Crakker t1_iu4c3go wrote
XKCD but I’m having trouble finding a good version
TooDaLoo14 t1_iu4coyv wrote
Have they tried turning it off and then back on again?
YoungDiscord t1_iu4daoh wrote
I'm picturing this entire plan of bringing the world's greatest minds, spending a decade designing gear and training an entire crew to personally fly all the way to mars, then once they get there one of them briefly hops out, repositions the bot, goes back to the shuttle and they all fly back to earth patting themselves on the back
HiveMynd148 t1_iu4dpo9 wrote
Martian Sand is so fine in size it gets practically Stuck to the panels from Static Electricity.
It's basically Laser printer Ink afaik.
[deleted] t1_iu4f9h9 wrote
[removed]
[deleted] t1_iu4ftlw wrote
[removed]
asad137 t1_iu4g3wl wrote
Helicopter is too far away.
fragmental t1_iu4gk87 wrote
For everyone who didn't check the article, this is the lander, not a rover.
bathroomheater t1_iu4gwki wrote
So I guess sci-fi shows have lied to me all my life and reversing polarity after randomly slapping a keyboard also won’t solve it either
[deleted] t1_iu4h1dh wrote
[removed]
Gopher--Chucks t1_iu4h6os wrote
Just wait til Big Printer gets their hands on that fine Martian soil.
caronare t1_iu4iobh wrote
Hmmm. I unfortunately read that as R. Kelly wipes tears off face.
bucksfromthegulag t1_iu4j5vh wrote
Helicopter is with the perseverance rover, this is the insight lander. And as mentioned already, it is way too far away (around 3400km)
UpsetRabbinator t1_iu4jx6c wrote
If NASA hasn't found a solution I doubt randos on reddit got any better idea.
BarnyardCidery t1_iu4kp3h wrote
“Sir, Shouldn’t we do something else while we’re here? I mean, literally anything?” “Not the mission Kiff”
enderjaca t1_iu4l323 wrote
Anytime I get mad and slap a keyboard, I solve that problem and boom, I instantly have a different problem. Molotov cocktails work the same way.
[deleted] t1_iu4l4rg wrote
[removed]
BuffNerd5 t1_iu4lmki wrote
how bout windshield wipers
Emmaleah17 t1_iu4mg8y wrote
This is a great idea. Literally like windshield wipers for the solar panels. Boom problem solved. Shouldn't be hard to install and should operate on very little energy.
jowen1968 t1_iu4mw2o wrote
If it's fine enough to be effectively glued by static to the panels the only thing wipers will do is scratch the panels into complete uselessness due to turning the wiper blades I to fine grit sand paper.
[deleted] t1_iu4sa9p wrote
[removed]
[deleted] t1_iu4tstj wrote
[removed]
colt_420 t1_iu4wbdk wrote
What if it just runs constantly like an air hockey table (Half joking half not mostly just wanted to be another random Reddit or with useless ideas here) Hi everyone :)
Alt-One-More t1_iu4wx00 wrote
I hear this a lot but I just never understand the reasoning given. There's no way it isnt possible to clean off the panels, it's more likely funding issues in the design as well as the official "lifespan" of these probes being months not decades.
Ie they'd rather save the weight on a cleaning mechanism in order to add another scientific instrument.
[deleted] t1_iu4yn4y wrote
[removed]
zino3000 t1_iu506uq wrote
This was a great listen, for the others with dyslexia out there - the full audio version is free here: https://play.ad-auris.com/narration/v1/nasa-spacecraft-records-epic-‘marsquakes’-as-it-prepares-to-die/f6o2e4LDWPt41P3D67Fi
PayZestyclose9088 t1_iu54b2r wrote
Omg youre so smart. You should apply to help make the rovers. I bet you will be making the next best thing
MyNameIsIgglePiggle t1_iu58vb7 wrote
Has anyone tried using the water / windscreen wipe button?
[deleted] t1_iu5apf5 wrote
[removed]
SlavSquat93 t1_iu5dqqm wrote
We can leave our planet and land on others but we can’t but cute little wipers on its solar panels? I’ve got a couple from my civic they can just have.
SEE_RED t1_iu5fcht wrote
He didn’t wipes things off…. He. He. Like to apply liquids.
the_buckman_bandit t1_iu5gbfo wrote
Some of the finest ink in the solar system!
tectonic_break t1_iu5gm6x wrote
None of these idiots tried to just wipe it off?? Nobody wanna do physical labor these days SMH.
[deleted] t1_iu5gz02 wrote
[removed]
cjgranfl t1_iu5jg2t wrote
Great info; interesting. Thanks for sharing.
DiegesisThesis t1_iu5lhpt wrote
Nah, you know those clear films offroaders put on their helmet visors so they remove the top layer when it gets dirty? Just do that.
BookMobil3 t1_iu5mwml wrote
How many years will they need to study Mars fault lines before picking their spots to terra form? Sounds like we’re stuck here for at least another century or two if we live that long
alfonseski t1_iu5qkx9 wrote
We can charge five times what we would for normal ink!
Bucket1982 t1_iu5rumz wrote
They forgot to put windshield wipers on the solar panels?
alfonseski t1_iu5sdh8 wrote
Kind of like those breakaway pants strippers have.
[deleted] t1_iu5wycn wrote
ChatahoocheeRiverRat t1_iu6m4xg wrote
I have visions of a solution that would look like something out of the classic cartoons. A mechanical arm, bearing a gloved hand with a whisk broom brushes off the dust.
SirThatsCuba t1_iu6vrpw wrote
Just put one of those films on it like you get on new electronics, and have the rover peel it off. Bam, new solar panel, no dust.
SirThatsCuba t1_iu6w2wr wrote
A pound of lead or a pound of feathers?
SigniaSyndie t1_iu6w71m wrote
No, the dust is so small that it's electrostatically charged. Even if the helicopter could reach this different lander- and it can't- it wouldn't pull enough dust off the panels for it to be worthwhile. This is something NASA plans for, and is working hard to try to solve, because the moon has the same issues.
[deleted] t1_iu6wcj5 wrote
[removed]
ammonium_bot t1_iu6z0ja wrote
Did you mean to say "more than"?
Explanation: No explanation available.
^^I'm ^^a ^^bot ^^that ^^corrects ^^grammar/spelling ^^mistakes.
^^PM ^^me ^^if ^^I'm ^^wrong ^^or ^^if ^^you ^^have ^^any ^^suggestions.
^^Github
TolMera t1_iu7092z wrote
We have been trying to contact you about your cubes extended warranty
WimpyRanger t1_iu7fl3b wrote
Well, I did go to school for electrical engineering, and a number of my friends work in space systems at Ratheon.
ali-n t1_iu7tr4g wrote
The original: https://xkcd.com/695/
Previously on reddit (also, the whole post is a fun read): https://www.reddit.com/r/space/comments/2rnap7/comment/cnhi2kh/
Sabrewolf t1_iu81nw5 wrote
So the most promising technology NASA has funded for electrostatic displacement of dust in a way amenable to a space environment is called EDS, or an Electrodynamic Screen.
This is essentially a layer that fits over the solar panel with some electrodes embedded in it, patterned in a way that allows us to "walk" dust off the panel using a specific sequence of charge bursts. At first glance this seems like a silver bullet, however this technology has yet to leave the prototyping lab and make it onto a Mars mission for several reasons:
- Efficiency. The presence of these electrode layers has been found to cut the power output of the panels by 15-25%. This is a no-go, until further developed.
- Cost. Since this is very new, no industry has developed to marginalize the cost of making these. Since they are essentially still lab prototypes they are still very expensive to make, which makes allotting funding for them kind of tricky. Class B missions (like InSight) have less $$$ available, and Class A flagship missions (like the rovers) are important enough to have an RTG provide power. So at present, this technology is sort of stuck in the middle between function and price; at a certain point you have to ask, if the mission is so important that it *needs* to work long-term, why not just use an RTG? Especially when almost every previous solar panel based mission lasted decades without such a technology.
- Safety/Reliability. A key point of an EDS is that it produces charge using voltages in the kV level. This runs the risk of arcing/damage at a certain point (Paschen's breakdown for the engineers). The breakdown voltage at which an arc forms depends a lot on the atmosphere, and we simply need further research into the composition of Mars dust in order to safely design an EDS that guarantees minimal risk of arcing.
TL;DR - It'll get there, it's not there yet.
Decronym t1_iu8232h wrote
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
|Fewer Letters|More Letters| |-------|---------|---| |EDL|Entry/Descent/Landing| |JPL|Jet Propulsion Lab, California| |RTG|Radioisotope Thermoelectric Generator|
^(3 acronyms in this thread; )^(the most compressed thread commented on today)^( has 11 acronyms.)
^([Thread #8194 for this sub, first seen 29th Oct 2022, 07:44])
^[FAQ] ^([Full list]) ^[Contact] ^([Source code])
WimpyRanger t1_iu87x57 wrote
What is the top layer on the rover panels? If the dust clings, the layer must hold a static charge. Given that the panels can rotate to shed the dust, and if they could also be charged to repel the dust, that seems like a clear win. If such a coating is not efficient enough, could you not use a grid type pattern? The EMF would still apply all over to some degree without absorbing much.
(Thank you for the reply)
Also, why couldn’t the panels be held near vertical to avoid the issue altogether?
Sabrewolf t1_iu8932v wrote
You are greatly overestimating the amount of mechanical force an EM field can apply to electrostatically charged martian dust. Even at the kV level, an EDS panel cannot "pop" dust off. Nor does charging the panel allow dust to become mobile enough to passively slide off without further EM interaction, even if the panel were angled.
The way an EDS works is by shifting the dust by alternatingly charging the patterned electrodes in the screen. Because EM field intensity falls off with the square of distance, this pattern is required to keep the dust close to the charged electrodes.
And all this still ignores the issue of Paschens breakdown.
[deleted] t1_iuaiy93 wrote
[removed]
TensionAggravating41 t1_iuc0jks wrote
Can I design the rover? Probably not. Can I install a pretty good and reliable fan and wiper/brush for the dustiest planet in our solar system. Bet your ass I can.
Edit: I also want part of the $950 million for 2-3 engineers and materials/equipment this project was gifted to record earthquake data.
AzPatriotOriginal36 t1_iugjg8m wrote
That seems silly to have a device to be in a hostile and unpredictable location and not put some type of preventative measures in place to keep its power sources protected. While I can understand that may not have been in the scope of the project, it is usually, in my opinion, a topic that transcends scope perimeters (if that is how you spell that lol) when it comes to project safety and life continuance of said projects.
PiBoy314 t1_iugkezo wrote
I’m sure the cost-benefit analysis was done. Wind has helped clear dust off the panels on Insight and other landers, but didn’t enough in this case. The environment is unpredictable and the mass and complexity they can carry is limited. Something to tilt, brush, repel, or otherwise remove dust could have failed and ended the mission early. Or it could have succeeded and we would have had fewer instruments for longer.
TheJazzButter t1_iu2kmtr wrote
MY LITTLE BUUDY IS NOT DYING, IT'S JUST GOING TO SLEEP.
/quietly weeps