Cool moss wall 👍

I'm jealous I want a pair of white boots so bad.

As far as I know, there isn't different colored spackle. But there are different colors of Colgate.

Cause if it's good enough for you teeth, it's good enough for not paint

Dab of tooth paste is faster than spackle, sand, prime, paint.

My realtor friend used to say white Colgate for the walls

You can get a pack of these crayons that come in a bunch of different colors. Rub them in, wipe the extra away with a clean cloth.

https://www.google.com/search?q=mohawk+fill+stick+pack&client=ms-android-google&sxsrf=AJOqlzXI0Hf4I3V5h2G2tCOyOARq5HvwMw%3A1677254458468&ei=Ot_4Y8mUHIqe5NoPpO-8mAs&oq=mohawk+fill+stick+pack&gs_lcp=ChNtb2JpbGUtZ3dzLXdpei1zZXJwEAMyBQghEKABMgUIIRCgATIFCCEQoAE6CggAEEcQ1gQQsAM6BwgAELADEEM6EgguEMcBENEDEMgDELADEEMYAToKCAAQgAQQFBCHAjoECAAQQzoFCAAQgAQ6BwgAEMkDEEM6CQgAEBYQHhDxBDoFCCEQqwI6BQgAEIYDSgQIQRgAUP4DWOANYJMRaAFwAHgAgAHIAYgBxAWSAQUwLjQuMZgBAKABAcgBDcABAdoBBAgBGAg&sclient=mobile-gws-wiz-serp#scso=_QN_4Y7yNC57l5NoP4PedmA0_32:0

There's a lot of nonsense answers here. This is probably the best bet considering you are only renting. Be sure to buy the pack because you will not be able to estimate the color over the internet. Sometimes you gotta melt some sticks together to get the right color (I doubt you will have to here). These things are made to fill boo-boos in laminate.

Ah ok, I was curious how you did it in what looked like a garage shop.

How did you cut the steel?

And then they wait to get near you to shake.

Don't matter how sharp my bit is, drilling literally 1000's of holes and hammering in 1000's of T-nuts, and shooting 1000's of screws will hurt.

Good luck. I made a rock climbing wall in my basement years ago and my elbows and wrists still hurt from drilling the holes for the t nuts. Make sure you use at least 2 screws to pin the t nuts to the plywood. They will back out and fall out if you don't secure it.

Use a heat gun on it lightly after you cut it. It will tighten it up a bit.