huongdaoroma
huongdaoroma OP t1_j2gu8ib wrote
Reply to comment by chaotic_evil_666 in Dropping a cable through ceiling > bottom of wall by huongdaoroma
It has keystone, but looks worse when I use it. After all keystoning lowers the resolution. Making a square out of a trapezoid means you're not using the full resolution. I'd like it to be as straight as possible
Submitted by huongdaoroma t3_100bchk in DIY
huongdaoroma OP t1_j2f5c0j wrote
Reply to comment by Raul_McCai in Weak drill > Non-flush screws > Load?? by huongdaoroma
Oh! I understand. Thanks
huongdaoroma OP t1_j2br8xr wrote
Reply to comment by Raul_McCai in Weak drill > Non-flush screws > Load?? by huongdaoroma
So can I use a Wiha torx set with a Ryobi impact?
huongdaoroma OP t1_j2bqws5 wrote
Reply to comment by Raul_McCai in Weak drill > Non-flush screws > Load?? by huongdaoroma
huongdaoroma OP t1_j2blnao wrote
Reply to comment by Pussycat-Papa in Weak drill > Non-flush screws > Load?? by huongdaoroma
Would the Dewalt DW1361/DW1354 Drill bit set + DWA2T40IR Impact set be compatible with Ryobi ONE+ Drill and Impact (P1817)?
huongdaoroma OP t1_j2bkx8a wrote
Reply to comment by Zesteesnuts in Weak drill > Non-flush screws > Load?? by huongdaoroma
What plug are you talking about? Can you link me?
huongdaoroma OP t1_j2bkssx wrote
Reply to comment by Raul_McCai in Weak drill > Non-flush screws > Load?? by huongdaoroma
Drill bit broke off and stuck inside wall (no protrusion) - 3 of 4 screws are flush, 1 of 3 has hole blocked by broken drill bit.
huongdaoroma OP t1_j27zj1g wrote
Reply to comment by Academic_Nectarine94 in Weak drill > Non-flush screws > Load?? by huongdaoroma
Yeah I bought it last year lol
huongdaoroma OP t1_j27zenu wrote
Reply to comment by keestie in Weak drill > Non-flush screws > Load?? by huongdaoroma
I'm pretty sure I was drilling into wood behind my drywall; I checked with a studfinder. My house doesn't have any brick surfaces.
Yeah, it was my drill bit that broke. I was trying to predrill it before putting the screws in properly
huongdaoroma OP t1_j27z11p wrote
Reply to comment by Texasscot56 in Weak drill > Non-flush screws > Load?? by huongdaoroma
Not too sure, but it broke off inside the wall and I can't get it out unless I dig
huongdaoroma OP t1_j27gfi0 wrote
Reply to comment by JonJackjon in Weak drill > Non-flush screws > Load?? by huongdaoroma
I'll just get drywall mud and redo it again with a Ryobi driver/impact set. Any suggestions for drill bit brands?
huongdaoroma OP t1_j27g1kn wrote
Reply to comment by KWPaul_Games in Weak drill > Non-flush screws > Load?? by huongdaoroma
I was able to make the left, right, and bottom screws flush but the middle one one be there anymore. I'll get a ryobo drill + impact and more bits (any suggestion for the bits or would they be part of the set?)
In the meantime, the 3 screws would hold?
huongdaoroma OP t1_j27ekmo wrote
Reply to comment by Academic_Nectarine94 in Weak drill > Non-flush screws > Load?? by huongdaoroma
Thanks! Exactly what I needed
huongdaoroma OP t1_j273pai wrote
Reply to comment by gburgwardt in Weak drill > Non-flush screws > Load?? by huongdaoroma
Wilco, thnx mate
huongdaoroma OP t1_j272u5f wrote
Reply to comment by gburgwardt in Weak drill > Non-flush screws > Load?? by huongdaoroma
T.T
huongdaoroma OP t1_j271mxm wrote
Reply to comment by farmerben02 in Weak drill > Non-flush screws > Load?? by huongdaoroma
Update: Drill bit broke inside one of the screw holes while pre-drilling after advice. Can it hold 55 lb with only 3 of 4 screws (middle screw not used...)?
huongdaoroma OP t1_j271maa wrote
Reply to comment by JonJackjon in Weak drill > Non-flush screws > Load?? by huongdaoroma
Update: Drill bit broke inside one of the screw holes while pre-drilling after advice. Can it hold 55 lb with only 3 of 4 screws (middle screw not used...)?
huongdaoroma OP t1_j271l4w wrote
Reply to comment by gburgwardt in Weak drill > Non-flush screws > Load?? by huongdaoroma
Update: Drill bit broke inside one of the screw holes while pre-drilling after advice. Can it hold 55 lb with only 3 of 4 screws (middle screw not used...)?
huongdaoroma OP t1_j2705lh wrote
Reply to comment by JonJackjon in Weak drill > Non-flush screws > Load?? by huongdaoroma
There actually wasn't a predrill size in the instructions if doing it in drywall>stud. The ones for brick/concrete gave a predrill size that included wall plugs (8mm/0.314 inch drill bit)
huongdaoroma OP t1_j26z3eh wrote
Reply to comment by gburgwardt in Weak drill > Non-flush screws > Load?? by huongdaoroma
Can I take the screws out and predrill a bit deeper in the same hole? I'd love a new drill, but saving for a new car rn - just got into a car crash a few weeks ago T.T
huongdaoroma OP t1_j26ypa5 wrote
Reply to comment by Thisguy2728 in Weak drill > Non-flush screws > Load?? by huongdaoroma
Can I use the same holes?
huongdaoroma OP t1_j26ynsh wrote
Reply to comment by gburgwardt in Weak drill > Non-flush screws > Load?? by huongdaoroma
Yeah, I pre-drilled into the stud, and my drill is on #15 setting (max)
Submitted by huongdaoroma t3_zyoa3c in DIY
huongdaoroma OP t1_j2ir85r wrote
Reply to comment by nah-meh-stay in Dropping a cable through ceiling > bottom of wall by huongdaoroma
What thickness do you recommend?